精品久久久久久无码专区不卡_女人与公拘交酡过程视频_饥渴的熟妇张开腿呻吟视频_伊人成色综合网_性人久久久久

Aluminum veneer refers to building decoration materials processed by fluorocarbon spraying technology after chrome plating and other treatments. Fluorocarbon coating mainly refers to polyvinylidene fluoride resin, which is divided into three types: primer, topcoat and varnish.

The spraying process is generally divided into two, three or four. The fluorocarbon coatings of Zhongda Industrial have excellent corrosion resistance and weather resistance. It can resist acid rain, salt spray and various air pollutants. Has excellent cold resistance and heat resistance, and can resist strong ultraviolet rays

The specific installation process of aluminum veneer is as follows:

Layout→Fixed frame connector→Fixed frame→Install aluminum plate→Closed structure treatment→Check

The only one,

Fix the skeleton, and then bounce the skeleton onto the base. The skeleton is fixed on the main structure, and the quality of the main structure is checked before wiring.

Connector for fixing skeleton

The frame is fixed on the column of the main structure by welding connectors.

3. Fix the skeleton

The skeleton is treated with corrosion protection. The installation skeleton position is accurate, and the combination is firm. Check the centerline and surface elevation after installation. In order to ensure the installation accuracy of the board, it is recommended to use theodolite to connect the beam. Properly treat deformation joints, settlement joints, and variable cross-sections to make them meet the requirements of use.

4. Install the aluminum plate

The installation of the aluminum plate should be firm and reliable, and easy to operate.

1. The gap between the board and the board should be treated internally to make it flat and smooth.

2. After installing the aluminum plate, cover the parts that are easily contaminated by plastic film or other materials for protection.